MegaRAID Storage Manager Application for Windows

Supported controllers:
  - N2125 SAS/SATA HBA for IBM System x
  - N2115 SAS/SATA HBA for IBM System x
  - N2126 SAS/SATA HBA for IBM System x 
  - IBM PureFlex System Storage Expansion Node
  - Onboard LSI 2004 SAS/SATA controller
  - Onboard LSI 1064 SAS controller
  - Onboard LSI 1064e SAS controller
  - Onboard LSI 1068e SAS controller
  - Onboard LSI 1078 SAS controller
  - ServeRAID C100 (81Y4475)
  - ServeRAID C105 (90Y4386)
  - ServeRAID H1110 SAS/SATA Controller for IBM System x (81Y4492)
  - ServeRAID H1135 Controller for IBM Flex System and BladeCenter (90Y4750)
  - ServeRAID M1215 SAS/SATA Controller for IBM System x (46C9114)
  - ServeRAID M1210e SAS/SATA Controller for IBM System x
  - ServeRAID M5210e SAS/SATA Controller for  IBM System x
  - ServeRAID M5210e SAS/SATA Controller
  - ServeRAID M5110 SAS/SATA Controller for IBM System x (81Y4481)
  - ServeRAID M5110e SAS/SATA Controller for IBM System x 
  - ServeRAID M5120 SAS/SATA Controller for IBM System x (81Y4478)
  - ServeRAID M5025 SAS/SATA controller (46M0830)
  - ServeRAID M5016 SAS/SATA Controller for IBM System x (90Y4304)
  - ServeRAID M5015 SAS/SATA controller (46M0829)
  - ServeRAID M5014 SAS/SATA controller (46M0916)
  - ServeRAID M1115 SAS/SATA Controller for IBM System X (81Y4448)
  - ServeRAID M1015 SAS/SATA Controller (46M0831)
  - IBM SAS HBA (25R8060)
  - IBM 3Gb SAS HBA v2 (44E8700)
  - IBM SAS Expansion Card (CFFv) for IBM BladeCenter (39Y9190)
  - IBM SAS Connectivity Card (CFFv) for IBM BladeCenter (43W3974)
  - IBM SAS/SATA RAID Kit (42C1312, 42C1313)
  - IBM ServeRAID BR10i SAS controller (44E8688)
  - IBM ServeRAID BR10il SAS controller (44X0411)
  - IBM ServeRAID BR10il v2 SAS controller (49Y4731)
  - IBM ServeRAID MR10il SAS controller (44E8767)
  - IBM ServeRAID MR10is SAS controller (44E8695)
  - IBM ServeRAID MR10ie (CIOv) SAS controller (46C7167)
  - IBM ServeRAID MR10i SAS controller (43W4296)
  - IBM ServeRAID MR10k SAS controller (43W4280)
  - IBM ServeRAID MR10M SAS controller (43W4339)
  - MegaRAID 8480 SAS controller (39R8850)
  

(C) Copyright International Business Machines Corporation 1999, 2015. All 
rights reserved.  US Government Users Restricted Rights - Use, duplication, 
or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

Note: Before using this information and the product it supports, read the 
general information in "Notices and trademarks" in this document.


CONTENTS
________

1.0  Overview
2.0  Installation and setup instructions
3.0  Usage information 
4.0  Unattended mode
5.0  Web site and support phone number
6.0  Notices and trademarks
7.0  Disclaimer


1.0  Overview
_____________

    1.1    This document describes how to install the MSM storage management 
           application.  MSM is a GUI application that runs in the Windows 
           environment.  

    1.2    Limitations
           - MegaRAID Storage Manager only supports 1024 bit SSL encryption key
             length.
           - New or first time installation of MSM must be done manually.  See
             section 2.0 Attended Installation for instructions.
	   - Current installed version of MSMS must be 13.11.01.08 or higher to
             run this update package in unattended mode.

    1.3    Problems fixed:
           - See change history
           
    1.4    Level of Recommendations and Prerequisites for the update:
           - If using any of the following, the LSI Logic MPT Windows device 
             driver (Miniport or Storport) must be installed and loaded before 
             MSM will function correctly.  Additionally, in the absence of the 
             LSI Pseudo Device Driver, the controller must have at least one 
             drive attached for the utility to be able to recognize the 
             controller.  This is due to a restriction of the Windows driver.
               - Onboard LSI 1064/1064e/1068/1078
               - IBM SAS HBA/3Gb SAS HBA v2
               - IBM SAS Expansion Card (CFFv)/SAS Connectivity Card (CFFv)
               - IBM SAS/SATA RAID Kits
               - IBM ServeRAID BR10 Series Controllers
           - If using any of the following, the LSI MegaRAID driver must be 
             installed and loaded before MSM will function correctly:
               - IBM ServeRAID MR10 Series Controllers
               - IBM ServeRAID M1000 or M5000 Series Controllers
           

    1.5    Dependencies:
           - None
	
    1.6	   Update Contents
           o  ibm_utl_msm_15.05.01.51_windows_32-64.exe
              - Zipped installation package
           o  ibm_utl_msm_15.05.01.51_windows_32-64.chg
              - Change history


2.0  Installation and setup instructions
________________________________________

  This package can be used with several of IBM's update management tools, 
  including IBM UpdateXpress Manager, IBM UpdateXpress System Packs, and 
  IBM Director.

  It can also be used as a standalone package.  

  To use the package with one of IBM's update management tools, follow the 
  instructions that came with your specific management tool.

  Standalone usage instructions
  -----------------------------

  ibm_utl_msm_15.05.01.51_windows_32-64.exe <option>

    -x <dirname> - Extracts contents to tor <dirname>
    -s - Silent/unattended install
    -? - Prints help information

   Attended Installation
   ---------------------
   Extract update to a directory using the option above.

    The installer provides the user with four setup options:
     - Complete: This option will install all program features.
     - Client: This option will only install components required to remotely 
       view and configure servers.
     - Server: This option will only install components required for remote 
       server management.
     - StandAlone: This option will only install components required for 
       local server management.

    This installation kit can be used in either interactive or non-interactive 
    mode.	

    To install the application in interactive mode, execute the command:
      Extract the contents of the ZIP file and run Setup.exe from the Disk1
	 folder.  If JRE is not already installed, the setup program will install
	 the appropriate version and reboot. 

      If you do not see the choices in #2, the program has determined you have a 
	 client only system with no LSI(R) SAS RAID controller installed or MSM 
	 was installed over a previous version and kept the same mode.

      If a security warning about "popup" appears, click "allow" if you wish to 
	 receive alerts. By default all Fatal and Critical events will be 
	 displayed by Popup. However, user can optionally add Popup for other 
	 types of events using Monitor Configurator. 

      Windows 2000 note: Authentication requires the admin privilege setting. To 
	 enable, go to Program --> Administrative Tool --> Local Security Settings. 
	 Assign the policy "Act as part of operating System" to user 
	 (Administrator / Everyone). 

      To start the utility, go to Start>Programs>MegaRAID Storage Manager and choose
	 StartupUI. You will be notified if no supported RAID controllers are found.

    To install the product in non-interactive, scripted mode, execute the 
    command:
      Setup.exe /s /v"/qn SETUPTYPE=<setuptype> 
	where setuptype may be StandAlone, Client or Server. 

    The SNMP Trap can be disabled either by using custom setup or by using 
    TRAPIND="N" as an msiexec parameter.

    Update only Command line options:
    ---------------------------------

       Below are the set of commands to be used for update only installation for
       different setup types.

       setup.exe /s /v"/qn UPGRADEONLY=1 SETUPTYPE=Complete"
       setup.exe /s /v"/qn UPGRADEONLY=1 SETUPTYPE=Server"
       setup.exe /s /v"/qn UPGRADEONLY=1 SETUPTYPE=Standalone"
       setup.exe /s /v"/qn UPGRADEONLY=1 SETUPTYPE=Client"
       setup.exe /s /v"/qn UPGRADEONLY=1 SETUPTYPE=Local"
       setup.exe /s /v"/qn UPGRADEONLY=1"

    Uninstallation
    --------------
    MSM can be uninstalled using "MegaRAID Storage Manager/Uninstall" from the 
    Start Menu. 

    MSM can also be removed using the native Add/Remove Programs utility.


    SNMP Agent Configuration
    ------------------------
    NOTE : Before you install the agent, make sure that SNMP Service is 
    already installed on the system.

    To install SNMP Service:
      1. Select Add/Remove Programs from Control Panel.
      2. Select "Add/Remove Windows components" in the left side of the 
         "Add/Remove Programs" window.
      3. Select "Management and Monitoring Tools" and click Next.
      4. Insert the Windows installation CD when prompted.

    To Configure the SNMP Service on the server side:
      1. Select "Administrative Tools" from the Control Panel.
      2. Select "Services" in the "Administrative Tools" window.
      3. Select "SNMP Services" in the "Services" window.
      4. Open SNMP Services.
      5. Go to the "Security" tab and make sure that "Accept SNMP Packets from 
         any host" is selected.
      6. Go to the "Traps" tab and verify the list of host IPs to which you 
         want the traps to be sent.

    To use the SNMP Agent:
      1. Use the SNMP Manager to retrieve the data.
      NOTE: It is assumed that you have already compiled mib files.  The mib 
            files are available at the same location as setup.exe.
      2. Use the Trap utility to get the traps.


3.0  Usage information
______________________
		
    Detailed usage information can be found in the ServeRAID M Series or MR 
    Series Software User's Guide.


4.0  Unattended Mode
____________________

    To run this package in unattended mode, use the following command:

    1) ibm_utl_msm_15.05.01.51_windows_32-64.exe -s

	
5.0 Web Sites and Support Phone Number
______________________________________

  o  You can find support and downloads for IBM products from the IBM Support 
     Web site:

     http://www.ibm.com/support/
     
     You can find support and downloads specific to disk controllers by 
     searching for the "Disk Controller and RAID Software Matrix" from the 
     main support page.

  o  For the latest compatibility information, see the IBM ServerProven Web 
     site:

     http://www-03.ibm.com/servers/eserver/serverproven/compat/us/

  o  With the original purchase of an IBM hardware product, you have access 
     to extensive support coverage.  During the IBM hardware product warranty 
     period, you may call the IBM HelpCenter (1-800-IBM-SERV in the U.S.) 
     for hardware product assistance covered under the terms of the 
     IBM hardware warranty.


6.0 Trademarks and Notices
__________________________

  IBM and ServeRAID are trademarks or registered trademarks of International 
  Business Machines Corporation in the United States and other countries.

  LSI and MegaRAID are trademarks or registered trademarks of LSI Logic, Corp 
  in the United States and other countries.

  Windows is a trademark or registered trademark of Microsoft Corporation in 
  the United States and other countries.

  Other company, product, and service names may be trademarks or service marks 
  of others.


7.0 Disclaimer
______________

  THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.
  IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED,
  INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS
  FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE
  INFORMATION IN THIS DOCUMENT.  BY FURNISHING THIS DOCUMENT, IBM
  GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS.

  Note to U.S. Government Users -- Documentation related to
  restricted rights -- Use, duplication or disclosure is subject
  to restrictions set forth in GSA ADP Schedule Contract with
  IBM Corporation.