LSI 1064e 2MB SAS Controller BIOS and Firmware Update for System x
BIOS Version 6.30.02.00, Firmware Version 1.30.10.00

Adapters Supported: IBM ServeRAID BR10il SAS Controller (44X0411)

Systems Supported: IBM System x3200 M2 (4367, 4368)
                   IBM System x3250 M2 (4190, 4191, 4194)
                   IBM System x3350 (4192, 4193)
                   IBM System x iDataPlex dx360 M2 Server (6380,7321,7323)
                   IBM System x iDataPlex dx360 M3 Server (6391)

(C) Copyright International Business Machines Corporation 1999, 2011. All 
rights reserved.  US Government Users Restricted Rights - Use, duplication, 
or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

Note: Before using this information and the product it supports, read the 
general information in "Notices and trademarks" in this document.


CONTENTS
________

1.0  Overview
2.0  Installation and setup instructions
     2.1 Standalone usage instructions
     2.2 Troubleshooting tips
3.0  Configuration information 
4.0  Unattended mode
5.0  Web site and support phone number
6.0  Notices and trademarks
7.0  Disclaimer


1.0  Overview
_____________

  1.1    This update includes the BIOS and firmware for the onboard LSI 1064e 
         SAS controller.
  
  1.2    Limitations:
         - None

  1.3    Problems fixed:
         - See change history

  1.4    Level of Recommendations and Prerequisites for the update:
         - The currently running device driver for the onboard LSI 1064e SAS 
           controller must be at least level 1.25.10.07 in order to run this 
           update.

  1.5    Dependencies:
         - None

  1.6    Update Contents
   		o  ibm_fw_mptsas_sysx2m-2.75_windows_32-64.exe
             - The executable update package
   		o  ibm_fw_mptsas_sysx2m-2.75_windows_32-64.chg
             - Change history


2.0  Installation and setup instructions
________________________________________

  This package can be used with several of IBM's update management tools, 
  including IBM UpdateXpress Manager, IBM UpdateXpress System Packs, and 
  IBM Director.

  It can also be used as a standalone package.  

  To use the package with one of IBM's update management tools, follow the 
  instructions that came with your specific management tool.

  2.1 Standalone usage instructions
  ---------------------------------

  Updating the local system:
    1) Run the executable by double clicking on the file icon, or by typing 
       'ibm_fw_mptsas_sysx2m-2.75_windows_32-64.exe' at a command prompt.
    2) Select "Perform Update" and then click "Next".
    3) Click "Update".
    4) To perform another function, click "Back", otherwise click "Exit" to 
       exit the utility.

  2.2 Troubleshooting tips
  ------------------------
    None


3.0  Configuration information
______________________________
  None


4.0  Unattended Mode
____________________

  To run this package in unattended mode, use the following command:

	ibm_fw_mptsas_sysx2m-2.75_windows_32-64.exe -s


5.0 Web Sites and Support Phone Number
______________________________________

  o  You can find support and downloads for IBM products from the IBM Support 
     Web site:

     http://www.ibm.com/support/
     
     You can find support and downloads specific to disk controllers by 
     searching for the "Disk Controller and RAID Software Matrix" from the 
     main support page.

  o  For the latest compatibility information, see the IBM ServerProven Web 
     site:

     http://www-03.ibm.com/servers/eserver/serverproven/compat/us/

  o  With the original purchase of an IBM hardware product, you have access 
     to extensive support coverage.  During the IBM hardware product warranty 
     period, you may call the IBM HelpCenter (1-800-IBM-SERV in the U.S.) 
     for hardware product assistance covered under the terms of the 
     IBM hardware warranty.


6.0 Trademarks and Notices
__________________________

  This product may contain program code or packages ("code") licensed by third 
  parties, as well as code licensed by IBM.   For non-IBM Code, the third 
  parties, not IBM, are the licensors.  Your use of the non-IBM code is 
  governed by the terms of the license accompanying that code, as identified 
  in the attached files.  You acknowledge that you have read and agree to the 
  license agreements contained in these files. If you do not agree to the 
  terms of these third party license agreements, you may not use the 
  accompanying code.

  IBM is a registered trademark of International Business Machines Corporation 
  in the United States and other countries.

  LSI is a registered trademark of LSI Logic, Corp in the United States and 
  other countries.

  Windows is a trademark or registered trademark of Microsoft Corporation in 
  the United States and other countries.

  Other company, product, and service names may be trademarks or service marks 
  of others.


7.0 Disclaimer
______________

  THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.
  IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED,
  INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS
  FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE
  INFORMATION IN THIS DOCUMENT.  BY FURNISHING THIS DOCUMENT, IBM
  GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS.

  Note to U.S. Government Users -- Documentation related to
  restricted rights -- Use, duplication or disclosure is subject
  to restrictions set forth in GSA ADP Schedule Contract with
  IBM Corporation.